3d metatron 4025 clinical what it?

3d metatron 4025 clinical is the reading, processing and analysing of information discerned from the output of electromagnetic waves issued by the human body, making it possible to define the character, origins, and degree of potentially harmful processes. The Metatron decodes this information during a diagnostic session, and can also roughly forecast future health dynamics.

Scanning is accomplished by means of magnetic inductors, which are special trigger sensors capable of measuring the state of cells in the human body, as well as the activity of bacteria, parasites, and other infectious agents inhabiting it. Metatron targets the subcortical brain – the largest repository of information about the ongoing process within an organism.

Information received during a short diagnostic session is reformed into a digital signal, which is subsequently decoded and analysed by Metatron’s unique medical software. 3d metatron 4025 clinical’s software database contains a total of over 10,000 spectral etalons of various preparations, illnesses and specifications.

The researches of the Institute of Practical Psychophysics have created an analogue-free investigation system, which allows tracing of any conditions in the body through changes in the wave characteristics of tissues of the body. Non-linear analysis systems (NLS) are the most advanced information technologies available in this century and can be considered the most remarkable and advantageous accomplishment of modern natural science. The diagnosis equipment is based on the spectral analysis of the vortex magnetic field of any biological object. It is quite unique and unparalleled in the world today.

The hardware-software system “3d metatron 4025 clinical” developed at the Institute of Practical Psychophysics enables a production of a preset bioelectrical activity of brain neurons, with this activity as a background it becomes possible to selectively amplify signals hardly detectable against the statistical fluctuations, and then isolate and decode the information they contain.

In a way the “3d metatron 4025 clinical” system takes bearings of this radiation just where it originates in order to then decode and display it on the computer screen where a virtual model of the organ is produced in specific colours.

Computer models also give physicians a three dimension projection of internal organs. Coloured marks placed upon the picture make it easier for the doctor to determine the site of pathological processes. It is possible to judge the process of disintegration of these biological structures, and to make prognosis, by comparing the range of colours of the marks and their arrangement on the computer model of the organ, using the dynamics of their change over a period of time.

In order to define a pathology in an area, it is necessary to investigate deeper levels of the organ produced on the screen by the computer until the pathology nidus is localized.

The researches of the Institute of Practical Psychophysics succeeded in producing this most effective equipment that is capable of tuning to the frequency of the master pulses automatically without human intervention, as well as, detecting and correcting defects and pathologies in organs and body cells on its own. This is achieved through a combination of different specifically modulated magnetic oscillations recorded on a matrix. The fundamental concept in the development of this equipment was the hypothesis that the human body has an electromagnetic information framework that is able to respond to external radiation.

In 1950 in Germany, R. Folle discovered and worked out a system of electrically testing the acupuncture points of the human body.

Unlike Folle’s Electro-Puncture Diagnostic method in which the energy potentials of organs and systems are measured through biologically active points (BAP) which show the organ condition indirectly (often with considerable error), the NLS method of analysis developed by the Institute of Practical Psychophysics makes an evaluation of the organ condition directly due to the resonance amplification of the radiation signal of the organ under investigation using a non-invasive trigger sensor. Every organ and every cell has its own distinctive oscillations which are stored in the computer memory and can be displayed on a screen as a graph, which represents the conditions of the information exchange between the organ (tissue) and the environment. Every pathological process has its own distinctive graph.

The program contains many pathological processes’ graphs with all progressive stages shown with age, sex and other variations taken into account. After reading the frequency characteristics of the biological object under investigation, the system compares the degree of their spectral similarity with healthy or pathologically affected tissue or infectious agents to obtain the closest pathological processes or tendency. In a case where the processes are similar, the virtual diagnosis mode allows carrying out of differentiated diagnosis of each process.

Another wonderful opportunity offered by NLS-analysis is medical testing. The system provides a unique opportunity of recording the frequency fluctuations of any preparation and adding them to the many thousands already held in database. The system then searches for a remedy that has the closest spectral characteristics of the pathological process and selects the most efficient remedy.

Even in those rare cases when a clinical symptomatic is very typical, the NLS diagnostic method allows investigating of additional information about the amplitude of defect and judging about the prognosis. In the majority of cases, it has principal significance for prompt prognosis and correct treatment choosing.

The inventor of the NLS Diagnostic System (“3d metatron 4025 clinical”) is considered to be academic Svyatoslav Pavlovich Nesterov, who in 1988 invented a trigger sensor, and thus found the idea of the system.

The Non-linear Diagnostic method is still being developed. Methods are improved very fast, so the versions of the system are renewed every six to twelve months. By means of using of new systems with digital trigger sensors the NLS Diagnostic system becomes not only faster, but quality accuracy was increased also. Dynamic methods, such as 3D and Virtual Reality visualization of research results, are now integrated into the system. It is obvious that in time, further dynamic methods will be introduced.

Differing from computer tomography and NMR, NLS analysis does not require fields of high intensity. This method looks promising for metabolism researches, especially at the cell level.

The NLS method has improved not only by means of introducing new technical inventions, but by new applications. Simple surgical manipulations, such as biopsy, has for a long time been carried out with the help of ultrasound, fluoroscopy and computer tomography. Now biopsy can also be controlled by the NLS System.

The cost of NLS diagnostic systems is much lower than the cost of other methods of hardware diagnostic devices. Comparing with other methods of hardware diagnostic devices, the NLS System allows to obtain a picture closest to the pathologoanatomic one. This, together with the safety that the NLS System provides, promotes the fast development of the NLS Diagnostic method.

how 3d metatron 4025 clinical work?

Hardware Parameters:

1) body detection function: Detectable systemic 12 big system, 256 items of zang-fu organs, glands, cell… ,

4352 kinds of disease make predictive report, the whole body 120000 list ensure accurate detection. Users

can saw their organs current and past, and future 3 to 5 years of health and organization cell vitality trend.

2) the item(goods) analysis function: Can analysis food, health products… The article such as whether to

human organs have the effect or damage, so as to carry out mediation balance life state.

3) repair treatment function: With energy spectrum restoration and repair function, to the early stagesof

the disease or has not been formed stage, especially for pain spot repair has the very good auxiliary

curative effect.

How to Operating 3d metatron 4025 clinical?

3d metatron 4025 clinical machine hardware install direction:

1,Open the laptop/computer,and enter the 3D software system

2,Connect Item cup and data line with the 3D machine, and then take the Data line

other side insert into the Laptop/computer

3,Open the 3D machine

4,After driver program installed, insert the headset into the 3D machine then out on

the headset , pls avoid the high light.

5,Run the 3D software desktop shortcut

6,After enter the software and find the software isn’t the English language, kindly

click the No.3 press-button of the 3D software homepage , and then choose the English

How to get 3d metatron 4025 clinical price?

We are the supplier of 3d metatron 4025 clinical,if you need the 3d metatron 4025 clinical price or more info,please contact us.we will reply as soon as. you can pay by Paypal,TT,West Union. We offer OEM.

Sale Cousultant : Mrs Lucy	Sale Consultant : Mr Mark
+86135-10907-401	+0086-191-5490-1065
Skype:lucygao1520	Email:Lucy@ihunter4025.com